13
2. Click the Push button Configuration option. The push button
configuration window appears.
3. Click the Custom icon to open the window that contains the variables
you are adjusting.
The Custom icon controls the values for the E-mail and OCR features. You
must configure the variables for each function separately before the image
is scanned to specified destination what you want.
Note that you could configure all two features at one time, but only the last
feature you configured is the destination the image will be scanned to.
To configure the values for the e-mail function
1. Select the e-mail application you want to send the scanned image to,
the type of image you are scanning, the desired resolution, a scanning
intensity level and the document size of the scanned image, by
clicking on the arrow to the right of each field.
2. Click the OK button to save the Custom push button configuration
settings.
3. Push the Custom button. The scanner will start the scanning
process and send the scanned image to the selected e-mail application.
To Next Page
Loading...
Need help?
General
