www.UncagedErgonomics.com
ASSEMBLY & OPERATING INSTRUCTIONS:
KT1
Adjustable Height &
Angle Keyboard Tray
IMPORTANT: Before using your KT1:
Read and clearly understand the contents of this manual
Understand how to adjust KT1 correctly
Practice adjusting KT1 with nothing on it.
KT1 allows you to easily adjust the height & angle of your keyboard to optimize your typing posture.
IMPORTANT: BEFORE using KT1 or placing a keyboard & mouse on KT1, practice adjusting KT1’s height & angle.
1
A B
C
D
E
Have Questions? Need Help?
Out A+ customer support team is here to help:
EMAIL: info@UncagedErgonomics.com
PHONE: 240-583-0517
G
8 Black M6 Nuts
F
6 Silver M6x16 Screws
H
8 Black M6x14 Screws
Plastic Runners
2
A
2. Align the Rail (A) with the edge of your desk
3. Use 6 F screws to connect the Rail (A) to
the bottom of your desk.
4. Slide the Arm (B) into the Rail (A)
- Reinstall the 2 stopper screws
3 4
E
1. Remove the ARM (B) from the Rail (A).
A. Remove two
Stopper Screws from the front edge
of the
Rail (A).
B. Slide the
ARM (B) off of the Rail (A)
1
A
B
Stopper Screws
A
B
Stopper Screws
To Next Page
Need help?
General
