www.UncagedErgonomics.com
ASSEMBLY & OPERATING INSTRUCTIONS:
KT2
Adjustable Height &
Angle Keyboard Tray
IMPORTANT: Before using your KT2:
Read and clearly understand the contents of this manual
Understand how to adjust KT2 correctly
Practice adjusting KT2 with nothing on it.
KT2 allows you to easily adjust the height & angle of your keyboard to optimize your typing posture.
IMPORTANT: BEFORE using KT2 or placing a keyboard & mouse on KT2, practice adjusting KT2’s height & angle.
2
1
A B C
D
Have Questions? Need Help?
Out A+ customer support team is here to help:
EMAIL: hello@UncagedErgonomics.com
PHONE: 240-583-0517
A
2. Align the Rail (A) with the edge of your desk
3. Use 8 E screws to connect the Rail (A) to the bottom of your desk.
3
E
G
8 Black M6 Nuts
E
6 Silver M6x16 Screws
H
8 Black M6x14 Screws
1. Remove the ARM (B) from the Rail (A).
A. Remove two
Stopper Screws from the front edge of the Rail (A).
B. Slide the
ARM (B) off of the Rail (A)
C. Re-install the two
Stopper Screws after completing the installation.
1
A
B
Stopper Screws
To Next Page
Need help?
General