CARE AND USE
1. Unlock the UA Sideline 20 Cooler by
ipping the carry handle to the
front position (A).
2. Open lid (B) and pre-chill the cooler
for maximum performance.
a. See General Care Section for
pre-chilling instructions.
3. After pre-chilling and removing
pre-chilling ice/water, add
chilled/frozen contents to the cooler.
4. Once cooler is lled to the
desired level, add ice
to the top of your contents.
a. Ensure the cooler is lled to the top
with ice for optimal temperature retention.
i. See General Care Section for maximum
insulation eciency tips.
5. Close and seal the cooler by closing
the lid and ipping the handle to the
locked position (C).
a. If desired, secondary locks (not
included) can be added to the metal
locking plates for extra security.
6. To transport the cooler, lift the handle
to the carrying position (D) and grip
handle tightly. Be mindful of the weight
of the lled cooler when lifting to
ensure no injury occurs.
a. Note that the lid is secured and
closed when the handle is in the
locked (C) and upright (D) positions.
7. If desired, use the tie-down anchors,
located on the sides of the cooler, as
tie-down slots or as nger holds to lift
the cooler.
8. If desired, use the bottle opener located on
the inside of the lid.
9. When nished using cooler, remove
all contents and remaining ice/water.
10. Clean cooler and allow time to dry with
the lid in the open position before placing
into storage.
a. Follow the General Care Section for
recommended cleaning practices.
A
B
C
D
* Image for reference only: actual product may vary* Image for reference only: actual product may vary
// SIDELINE COOLER CARE & USE PAGE 7
UA SIDELINE 2 0 COOLER
C
To Next Page
Loading...
Need help?
General