EasyManua.ls Logo

Uni-Mig WORKSHOP 255 - Contents

Uni-Mig WORKSHOP 255
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Machine Model
Description Part Number
UNIMIG Workshop 255 KUM255
CONTENTS PAGE No:
Safety 4
General Description 6
Operation 7
Parts List 9
Machine Parts 11
Welding Tips 12
Maintenance 14
Trouble Shooting 14
UNI FLAME AUTOLIFT
UNIMIG pursue a policy of continuous research and development, and therefore
reserve the right to change the specifications, or design, without prior notice.
*
3 year warranty power source.
YEARS Warranty
*
3
*** CAUTION ***
Do not heat, cut or weld tanks, drums or containers
until the proper steps have been taken to insure that such procedures will not cause
ammable or toxic vapours from substance inside. These can cause an explosion even
though the vessel has been “cleaned”.Vent hollow castings or containers before heating,
cutting or welding. They may explode.

Related product manuals