UNI-T UTG932E

3) Set Modulation Rate
Press
Rate
‚ enter 200 by numeric keypad and select parameter unit [Hz].
Internal â
1,000,000,00 kHz
00.000 Hz
4) Set Carrier Wave Signal
Press [Wave |>[Sine]to select sine wave (default) as carrier waveform.
OFF
00 kHz â
LINI-T,.
Pressl Freq |to set frequency, enter 2 by numeric keypad, and select parameter unit [kHz ).
Press) Amp |to set amplitude, enter 1 by numeric keypad, and select parameter unit |Vpp).
Hi
29