UNI-T UTG932E - Appendix A: Factory Reset State

Appendix A: Factory Reset State
LINI-T,.
Parameter Factory default
Channel parameters
Current carrier wave Sine wave
Output load High
Sync output Off
Channel output Off
Channel output reverse phase Off
Amplitude limit off
Upper amplitude limit +10V
Lower amplitude limit -10V
Fundamental wave
Frequency 1kHz
Amplitude 100mVpp
DC offset OmV
Initial phase 0°
Duty ratio of square wave 50%
Symmetry of ramp wave 100%
Duty ratio of pulse wave 50%
Rising edge of pulse wave 15ns
Falling edge of pulse wave 15ns
Arbitrary wave
Built-in arbitrary wave User1
AM modulation
Modulation source Internal
Modulation wave Sine wave
Modulation frequency 100Hz
Modulation depth 100%
FM modulation
Modulation source Internal
Modulation wave Sine wave
Modulation frequency 100Hz
Frequency deviation 1kHz
37