To Next PageTo Next Page
Need help?Do you have a question about the Unical !DEA CS 24 el and is the answer not in the manual?
General| Heat output | 24 kW |
|---|---|
| Nominal heat output | 24 kW |
| Temperature range | 30 - 80 °C |
| Fuel | Natural gas / LPG |
| Water pressure | 3 bar |
Essential safety instructions for boiler operation and user conduct.
Explains the meaning of various symbols to ensure safe understanding of the manual.
Defines the intended purpose of the boiler and warns against improper usage.
Outlines key information installers must convey to the end-user for proper operation.
Critical safety precautions and potential hazards associated with the boiler's installation and use.
Details the technical specifications and performance characteristics of the boiler models.
Provides visual diagrams identifying key components and their dimensions.
Illustrates flow rate and pressure performance curves for installation planning.
Presents standardized technical operating data for different boiler models and gas types.
Lists general operational parameters and features of the boiler system.
States crucial warnings and conditions for safe and proper boiler installation.
Refers to the necessity of adhering to local and national installation regulations.
Describes essential checks and adjustments before final installation.
Details the contents of the boiler packaging and important handling instructions.
Provides guidelines and safety requirements for selecting the boiler's installation location.
Explains the correct methods and limitations for connecting flue gas exhaust systems.
Specifies the required connections for gas, water, and other essential systems.
Outlines the procedure for filling the heating system with water and bleeding air.
Details the safe and correct procedures for connecting the boiler's electrical components.
Lists essential checks and steps to be performed before starting up the boiler for the first time.
Describes the process for measuring and verifying combustion efficiency.
Explains how to activate the boiler's calibration mode for efficiency measurement.
Guides on correctly placing measurement probes for combustion efficiency testing.
Details how to perform necessary adjustments to the burner for optimal performance.
Specifies the procedure for setting the minimum gas valve output.
Describes how to adjust the boiler's heating output to match the system's needs.
Provides general guidelines and safety precautions for performing inspections and maintenance.
Lists adjustable parameters on the boiler's control panel.
Explains the procedure and safety requirements for converting the boiler to different gas types.
Highlights critical information and reminders relevant to boiler operation and maintenance.
Presents the electrical schematic for understanding the boiler's wiring connections.
Lists potential error codes displayed by the boiler and their corresponding solutions.
