UNICONTROL Electronic S-SW-8 Resumed Manual

S-SW-8, Resumed Manual
UNICONTROL Electronic GmbH
1 /2
11-17-2020
Freinsheimer Straße 3
D-68219 Mannheim Tel.: 0621 87982 0
www.unicontrol-gmbh.de Fax: 0621 87982 35
S-SW-8
Resumed Manual
● Primary use in the
transport technology
controls of roller
transport lines.
● Capacitive sensor sys-
tem with differential
signal comparison.
● Detection of metallic
and other conductor
objects.
● Minimal function in-
fluence from the pres-
ence of impurities,
metal dust or abra-
sives.
● Optional memory
function: Power on
with the last valid
operational parame-
ters without adjust-
ments. Unmoved ob-
jects on previous
power down keep on
recognized.
Connections
Stecker Pin Anschluss
X1 1
24V
AC/DC
Supply Voltage Switchable polarity.
2
3 PE Electric reference po-
tential for the evalua-
tion unit.
!
Connect to the sensor's mounting plate!
The mounting plate must be connected to
(safety) earth potential.
X2 1 C Relay common contact
2 NO Relay normally open contact
3 NC Relay normally closed contact
X3 1 Core Connecting in the measuring electrode (up).
Use of coaxial cable.
2 Shield Connecting in the opposite electrode (down).

UNICONTROL Electronic S-SW-8 Specifications

General

Brand	UNICONTROL Electronic
Model	S-SW-8
Category	Security Sensors
Language	English