Technical Data
RFW-Series | Version 1.01 7
4 Technical Data
Fig. 2: Dimensions
4.1 Type plate
Fig. 3: Type plate
5 Transport, packaging, storage
5.1 Delivery
After delivery, check the roller driver for visible transport
damage. If you discover any damage to the roller driver,
report it immediately to the transport company or dealer.
5.2 Packaging
All of the machine‘s packaging materials and packing
aids are suitable for recycling and must always be dis-
posed of using material-based recycling systems.
Packaging materials made of cardboard must be
shredded and disposed of as part of waste paper recy-
cling.
The foils are made of polyethylene (PE), padding is
made of polystyrene (PS). Dispose of these substances
at a recycling centre or hand them over to the relevant
waste disposal company.
5.3 Storage
Oil the roller driver and store it in a frost-free and dry en-
vironment. Do not place anything on the roller driver.
RFW 0,5 1 2
Load-carrying
capacity [kg]
500 1000 2000
Carrier flange width
[mm]
55-220 58-220 66-220
Curve radius min. [m] 0,5 0,7 0,9
Length A [mm] 285 300 300
Width/Depth B [mm] 198 238 277
Height C [mm] 158 183 208
Loop thickness D
[mm]
12,5 17 20
Loop width E [mm] 40 31 31
Clearance F [mm] 3 3 3
Weight [kg] 5 8,8 14
RFW 3 5
Load-carrying capacity [kg] 3000 5000
Carrier flange width [mm]
74-220 90-220
Curve radius min. [m] 1,2 1,0
Length A [mm] 328 354
Width/Depth B [mm] 324 373
Height C [mm] 249 296,5
Loop thickness D [mm] 26 28
Loop width E [mm] 31 40
Clearance F [mm] 3 5
Weight [kg] 23 40
NOTE!
Protect the roller driver from humidity.
To Next Page