Edit Site
To determine whether the information on this page applies to your
scanner, see the tags at the bottom of the page.
When you create a new site, the scanner automatically assigns a default site name using
the following pattern
Site XXX-YYY TTT
where XXX is a 3-digit system index number, YYY is a sequential site number (1 through
256), and TTT is one of the following 3-letter type codes:
● EDC (any EDACS system)
● LTR (any LTR system)
● MOT (any Motorola system)
● P25 (a standard P25 system)
● 1FQ (a single-frequency P25 system)
● Options available for all sites:
❍ Edit Name
❍ Set Quick Key
❍ Set Startup Key
❍ Set Frequencies
❍ Set Modulation
❍ Set Attenuator
❍ Set Lockout
❍ Set Hold Time
❍ Set LocationInfo
❍ Set State (BCT15X Only)
❍ Delete Site
❍ New Site
● Options available for Motorola systems
❍ Edit Band Plan
❍ P25 Waiting Time (BCD396XT and BCD996XT Only)
● Options available for P25 systems (BCD396XT and BCD996XT Only)
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/EditSite.html (1 of 5)5/26/2009 11:14:48 AM
To Next Page
