What to do if my Uniden R8 Radar has no display or audio?
If your Uniden Radar has no display, check the connections to ensure they are secure. If there is no audio, check to see if the Voice feature is turned off.
What to do if my car starts but my Uniden Radar R8 doesn't turn on?
If your vehicle starts but your Uniden Radar R8 doesn't turn on, verify that the power cord is securely connected to the unit and properly inserted into the cigarette lighter jack.
Why didn't my Uniden Radar R8 alert me to a police car?
If your Uniden Radar R8 didn't alert you when a police car was nearby, it might be because the officer's radar/laser unit wasn't turned on. Alternatively, ensure that the band on your R8 is activated. To check, press the MENU button and navigate through the options until you reach the bands setting. If a band is off, the OLED screen will display 'OFF'. Turn the band on to enable alerts for that frequency.
Why does my Uniden R8 Radar alarm when hitting bumps?
If your Uniden Radar alarms when the vehicle hits bumps, check the connections to ensure they are secure.
General| Radar Bands | X, K, Ka, Laser |
|---|---|
| GPS | Yes |
| Display | OLED |
| Filtering | Advanced K/Ka Band Filtering |
| Directional Arrows | Yes |
| Auto Mute | Yes |
| Voice Alerts | Yes |
| Ka Band Segmentation | Yes |
| Red Light Camera Alert | Yes |
| Speed Camera Alert | Yes |
| Detection Range | Extreme Long Range |
| Bluetooth Connectivity | No |
| 360° Protection | Yes |
| Laser Detection | Yes |
| Auto Mute Memory | Yes |
| Real-Time Alerts | Yes |
| AutoLearn Technology | Yes |
| Battery Type | 12V DC |
| Firmware Updates | Via USB |
| Sensitivity | Adjustable (City, Highway, Auto) |
Lists key features of the Uniden R8 radar detector.
Details the power cord and its connections for the R8 detector.
Step-by-step guide for installing and powering on the R8 unit.
Explains how the R8 establishes a GPS connection upon powering on.
Configures the sensitivity levels for different radar bands (X, K, Ka).
Controls the GPS function and its availability in different menu levels.
Notifies the user about the presence of red light cameras.
Configures automatic OLED brightness adjustment based on time or light sensor.
Resets all system settings to their original factory defaults.
Instructions for powering on the R8 unit.
How to increase or decrease the audio volume of the detector.
Steps to adjust the brightness level of the OLED display.
How to manually tag a geographic location for future alerts.
Defines the order in which different types of alerts are displayed and announced.
Allows selection of different visual formats for alerts on the OLED.
How to divide the total memory points between Mute Memory and User Marks.
Displays multiple detected radar signals simultaneously on the OLED.
Selects which operating mode (Highway, City, Auto, Advanced) is shown.
Configures the visual indicator for active radar scanning.
Configures the OLED to show the current time.
Details the R8's compliance with Part 15 of the FCC rules.
Explains interference limits, cautions, and radiation exposure compliance.
Details the R8's compliance with Industry Canada standards.
Describes the legal rights and limitations related to the warranty.
Steps to follow for warranty service or repairs.
To Next Page