To Next Page
J
Jacqueline MontoyaAug 18, 2025
Why does my Uniden Security Sensors alarm on bumps?
- LLori RobinsonAug 18, 2025
If your Uniden Security Sensors alarms when the vehicle hits bumps, check that all connections are secure.
Why does my Uniden Security Sensors alarm on bumps?
If your Uniden Security Sensors alarms when the vehicle hits bumps, check that all connections are secure.
Why does Uniden Security Sensors alarm with no radar source?
If your Uniden Security Sensors alarms briefly in the same location without a radar source in sight, there might be a motion sensor or house alarm nearby.
Why didn't my Uniden Security Sensors R9 Extreme alert me to a police car?
If your Uniden Security Sensors R9 Extreme didn't alert you when a police car was nearby, it might be because the officer's radar/laser wasn't active. Ensure the relevant band is turned on. Press the MENU button to navigate to the band settings. If a band is off, the OLED screen will display 'OFF'. Turn the band on.
How to fix a blank display on Uniden Security Sensors?
If the display of your Uniden Security Sensors is blank, it's likely in Dark mode. To adjust the screen brightness, press and hold the MUTE/DIM button.
What to do if Uniden Security Sensors restarts while driving?
If your Uniden Security Sensors unit restarts while driving, a loose connection might be the cause. Check all connections and re-secure them if necessary.
Why didn't my Uniden Automobile Accessories R9 alert me to a police car?
If the Uniden Automobile Accessories R9 did not alert you when a police car was nearby, the officer may not have had their radar/laser units turned on. Ensure that the band is turned on by pressing the MENU button and cycling through the options to get to the bands. If the band is off, the OLED will display OFF. Turn the band on.
How to fix a blank display on my Uniden Automobile Accessories?
If the display of your Uniden Automobile Accessories is blank, it might be in Dark mode. Try pressing and holding the MUTE/DIM button to adjust the screen brightness.
What to do if the Power On sequence starts when driving with Uniden Automobile Accessories?
A loose connection can cause your Uniden Automobile Accessories to restart. Check the connections and re-secure them if needed.
Why do Uniden Automobile Accessories R9 audible alerts become softer?
If the audible alerts on your Uniden Automobile Accessories R9 become softer after the first few alerts, it is likely in Auto Mute mode. Please refer to page 30 for further information.
How to fix a Uniden R9 Automobile Accessories that won’t turn on?
If your Uniden Automobile Accessories won’t turn on, check all the connections to ensure they are secure.
General| Product Type | Radar Detector |
|---|---|
| GPS | Yes |
| Red Light Camera Alert | Yes |
| Laser Detection | Yes |
| Display Type | OLED |
| Voice Alerts | Yes |
| Bluetooth | Yes |
| Wi-Fi | Yes |
| Auto Mute | Yes |
| Speed Camera Alerts | Yes |
| Wireless Updates | Yes |
| Bands | X, K, Ka, Laser |
Details the order of alerts for various signals and conditions.
Explains how to reduce alarm volume automatically after an alert.
Shows how the display indicates scanning progress and signal strength.
Displays the current time when selected in the menu.
Shows altitude measurements in feet or meters.
Basic cleaning instructions for the device.
Instructions for updating the device's software and database.