Need help?Do you have a question about the Uniden uh064sx-2 and is the answer not in the manual?
General| Brand | Uniden |
|---|---|
| Model | uh064sx-2 |
| Category | Two-Way Radio |
| Language | English |
Identifies and describes the physical controls and indicators on the radio unit.
Explains the meaning of icons and data displayed on the radio's screen.
Instructions on how to install NiMH battery packs or AAA alkaline batteries into the radio.
Instructions on how to attach and remove the belt clip from the radio unit.
Notification when battery level is low, disabling transmit and indicating recharge or replacement.
Details on the automatic display backlight function and its behavior.
Procedure for turning the radio on/off and adjusting the audio volume level.
Instructions to enable/disable key press feedback and enable the Roger Beep notification.
How to activate and deactivate the keypad lock feature for preventing accidental presses.
Steps for selecting the desired communication channel on the radio.
How to choose between High, Medium, and Low transmit power levels.
System that shuts off weak transmissions and unwanted noise automatically.
Enables listening for weak signals on the current channel by pressing the monitor key.
Procedure to scan through channels, stopping at active ones or priority channels.
Unit waits 2 seconds for a response after signal ends before resuming scan.
How to use repeaters to extend radio range, limited to CH01-CH08.
Continuous Tone Coded Squelch System for talking without hearing other users.
Digital Coded Squelch, an extension of CTCSS with 104 extra squelch codes.
Automatic transmitting function using voice input via VOX headset mic.
How to select and transmit one of five available call tones.
Procedure to set a specific channel as a priority for scanning.
Prevents transmission on a busy channel when CTCSS or DCS is active.
Instructions for storing and clearing channels into the scan memory.
To Next Page
