Uniden UH35 User Manual

Model Controls & Indicators Reset Procedure
UH35
1
2
3
4
5
6
7
8
9
10
11
1 Antenna
2 PTT (Push-To-Talk) Button
3 Channel/Scan up Key
4 Duplex/Keylock Key
5 Channel/Scan down Key
6 Speaker
7 Volume up/Mon (monitor)
Key
8 Power On/Off Key
9 Volume down/Mon
(monitor) Key
10 Microphone
11 Battery Compartment Door
12 Channel Indicator
13 Battery Low Indicator
14 Transmit Indicator
Turn the unit off, Press and hold
“[channel ▲] and [vol▲]” buttons
together at the same time and
turn the power back on. After 15
seconds turn power back off, then
turn on.
UH820S
1
2
3
4
5
6
7
9
11
10
12
13
8
1 Antenna
2 SCAN/MON
3 Rotary Vol/Power Knob
4 Speaker
5 Accy Speaker MIC Jack
6 Microphone
7 LCD Display
8 USB Charge Port
9 UP and DOWN Keys
10 MENU[MEM] Key
11 SMART Button
12 PTT (Push-To-Talk) Button
13 LED
Turn the unit off, Press and hold
‘’MENU’’& “Smart” buttons togeth-
er at the same time and turn the
power back on. After 15 seconds
turn power back off then on.
Uniden UHF Handheld and CB Radio Troubleshooting

Uniden UH35 Specifications

General

Brand	Uniden
Model	UH35
Category	Radio
Language	English

Summary

Uniden UH35

UH35 Controls & Indicators

Overview of the physical controls and indicators for the Uniden UH35 model.

UH35 Reset Procedure

Instructions on how to perform a factory reset on the Uniden UH35 model.

Uniden UH820S

UH820S Controls & Indicators

Overview of the physical controls and indicators for the Uniden UH820S model.

UH820S Reset Procedure

Instructions on how to perform a factory reset on the Uniden UH820S model.

Uniden UH850S

UH850S Controls & Indicators

Overview of the physical controls and indicators for the Uniden UH850S model.

UH850S Reset Procedure

Instructions on how to perform a factory reset on the Uniden UH850S model.

Uniden UH9000

UH9000 Controls & Indicators

Overview of the physical controls and indicators for the Uniden UH9000 model.

UH9000 Reset Procedure

Instructions on how to perform a factory reset on the Uniden UH9000 model.

Uniden UH9060/UH9080

UH9060/UH9080 Controls & Indicators

Overview of the physical controls and indicators for the Uniden UH9060/UH9080 models.

UH9060/UH9080 Reset Procedure

Instructions on how to perform a factory reset on the Uniden UH9060/UH9080 models.

Other Troubleshooting Guide

No TX Troubleshooting

Steps to resolve issues with no transmit audio or signal for CB mobile and handheld radios.

No RX or Poor RX Troubleshooting

Steps to resolve issues with receiving active channels or poor reception.

Low Transmit Power Issues

Guidance on adjusting or checking transmit power levels for optimal range.

No TX Audio Troubleshooting

Steps to resolve issues with no audio output during transmission.

No RX Audio Troubleshooting

Troubleshooting steps for no audio input or reception.

Scanning Function Issues

Steps to take if the radio is unable to scan channels after reset.

LCD Display Malfunction

Instructions for when the Liquid Crystal Display (LCD) is not functioning.

Button and PTT Malfunctions

Guidance for issues with buttons or the Push-To-Talk (PTT) button.

Battery Charging Problems

Troubleshooting steps for handheld radios not charging their batteries.

Battery Hold Charge Issues

Instructions for handheld radios where batteries do not retain charge.

Antenna Malfunction Diagnosis

Steps to address issues with a broken or malfunctioning antenna.