EasyManua.ls Logo

Uniden UH8080NB User Manual

Uniden UH8080NB
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
UH8080NB
Remote Speaker MIC
UHF CB Transceiver
For more exciting new products please visit our website:
Australia: www.uniden.com.au
New Zealand: www.uniden.co.nz

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Uniden UH8080NB and is the answer not in the manual?

Uniden UH8080NB Specifications

General IconGeneral
BrandUniden
ModelUH8080NB
CategoryTransceiver
LanguageEnglish

Summary

Controls and Connectors

Microphone Connection

Connecting the Microphone

Instructions for properly connecting the microphone to the radio's MIC jack.

Microphone Hanger Mounting

Conventional Mounting with Screws

Method for mounting the microphone hanger using screws.

MIC Hanger Mounted Over MIC Cable

Radio Operation Basics

Turning on the Power

Procedure to turn the UH8080NB radio on and off using the power button.

Squelch Settings

Setting the Auto Squelch Level

Adjusts the squelch sensitivity to filter out background noise.

Channel Selection and Banks

Selecting a Channel

How to choose and switch between different radio channels using up/down buttons.

Instant Channel and Transmitting

Transmitting

Instructions for sending audio signals using the Push-To-Talk button.

CTCSS and DCS Squelch

CTCSS (Continuous Tone Coded Squelch System)

Using privacy codes for selective communication via CTCSS tones.

DCS (Digital Coded Squelch)

Utilizing digital codes for enhanced selective communication.

Scanning Features

Scanning

Automatically searching for active channels or frequencies.

Programmable RX Channels

100 User Programmable RX Channels

Setting up to 100 receive-only channels with custom frequencies.

Manually Programme a RX Channel

Step-by-step guide to manually entering frequencies for RX channels.

Instant Replay Function

Instant Replay

Recording and replaying the last minute of received signals.

Close Call RF Capture

Selective Calling System Overview

Receiver Quieting (Tone Squelch)

Muting receiver audio unless a specific Selcall ID is received.

Tone Calling

Making selective calls to other radios using stored Selcall IDs.

Group Calling Capability

Ability to transmit calls to multiple radios within a group.

Selcall ID Programming

Programming the Selcall ID for your UH8080NB

Setting the unique ID for your radio for Selcall communication.

Storing Selcall IDs of other users to the ID Memory

Saving other users' Selcall IDs for easy calling.

Tone Calling and Receiver Quiet Mode

Tone Calling (Making a Selcall Call)

Initiating selective calls to other radios using their Selcall IDs.

Group Calling

UHF-CB Channel Guidelines

UHF-CB Channel Frequencies

Related product manuals