What to do if scheduled recording does not happen on Uniden Intercom System?
If a scheduled recording does not occur at the scheduled time, ensure the system time is set to the current time. Also, make sure the micro SD card is inserted into the monitor and has available memory. Finally, ensure the camera setting is turned on.
Why does my Uniden Intercom System camera show no signal?
If the outdoor camera’s signal status icon shows no bars, make sure the camera is plugged in and the red LED is on. Also, ensure the camera is paired to the correct channel. Try re-pairing the camera and monitor or moving the camera closer to the monitor in case it is out of range.
What to do if Uniden Intercom System camera won’t pair with the monitor?
If the camera won’t pair with the monitor, ensure you are pressing and releasing the pairing button quickly. Avoid pressing and holding the pairing button.
Installation guide for the intercom camera, including power options and placement.
Instructions for mounting the outdoor camera using its provided stand.
Details components and functions of the intercom camera unit.
Configuration options for pairing new devices and camera settings.
Settings for recording schedules, motion detection sensitivity, and storage.
General| Weatherproof | No |
|---|---|
| Hands-free Operation | Yes |
| VOX Capability | Yes |
| Belt Clip | Yes |
| Type | Wireless Intercom |
| Frequency Range | 900 MHz |
| Battery Life | 10 hours |
To Next Page