Uniden VS1600XR User Manual

VS1600XR / VS2600XR
Vehicle Security System
with Rolling Code and
Duel Immobilisers
Uniden's policy is one of continual development and improvement. For this reason, Uniden reserves the right to change
specifications without notice.
Copyright © 2002 Uniden. All rights reserved.
File:\DTP\MANUAL\Uniden\MoVs2600Xr.P65\JUL2001
ORDER PART# 760-919/916
Congratulations! And thank you for purchasing the VS1600XR / VS2600XR Vehicle
Security System!
The VS1600XR / VS2600XR Vehicle Security System are one of the most reliable and
economical ways to protect your vehicle. Once armed, your starter, and ignition systems
are cut, giving potential thieves 2 headaches! Even if they smash your VS1600XR /
VS2600XR Vehicle Security System , they cannot start your car! In addition, opening a
door or turning the ignition switch ON triggers the VS1600XR / VS2600XR Vehicle
Security System and siren or horn will sound. What's more?
VS1600XR / VS2600XR Vehicle Security System is equipped with the patented Rolling
Code technology!
REMOTE CONTROL TRANSMITTER
Rolling Code
With the Rolling Code technology, the alarm's RF code changes every time you press the
remote control button, the receiver never responds twice to the same code. In addition,
with over 18 quintillion codes, the chances of ever repeating a code are virtually non-
existent. So-called "code grabbers" and "scanners" are rendered obsolete  a thing of the
past.
FUNCTIONS OF TRANSMITTER
Button 1 Arm, Disarm, AEI deactivation and Panic activation are usually controlled by
button 1.
Button 2 Quiet Mode, Boot release and second car operation are usually controlled by
button 2.
Button 3 Optional garage door opener (part SEA910.)
Operating Guide
®

Uniden VS1600XR Specifications

General

Brand	Uniden
Model	VS1600XR
Category	Car Alarm
Language	English

Summary

Remote Control Transmitter

Rolling Code

Explains how the alarm's RF code changes with each remote press for enhanced security.

Functions of Transmitter

Details the primary functions assigned to buttons 1, 2, and 3 on the remote transmitter.

Arming

Passive Arming

System arms automatically after ignition is turned off and the last open door is closed.

Zone Bypass

Enables arming via transmitter for cars with faulty door switches or interior lights.

Disarming

Disarming Modes

Details different disarming behaviors based on system settings (passive/active, lock enable/disable).

Features

Domelight Supervision Output

When disarmed, the interior domelight turns ON for about 16 seconds.

AEI (Automatic Engine Immobiliser)

Selectable feature for automatic starter disable, preventing theft even when disarmed.

Quiet Mode

For silent arming or disarming the system using transmitter button 2.

Valet Mode

Prevents system arming; useful for service or unloading groceries.

Panic Mode

Forces system into trigger mode (siren/lights) by pressing button 1 for 3 seconds.

2nd Channel Output

Operates optional accessories like boot release by pressing button 2 for 3 seconds.

2nd Car Operation

Allows interchangeability of transmitter buttons 1 and 2 for arming/disarming.

LED Status Indicator

Explains the meaning of the LED's different states (Off, Steady On, Flashes).

Total Security Features

Code Learning Technology (CLT)

Prevents easy deactivation and unauthorized learning of transmitters.

Emergency Disarm

Back-up method for disarming if transmitter is lost or stolen.

Changing Security Code

Procedure to change the security code for enhanced security and transmitter learning.

Learning New Transmitters

Procedure to replace lost/stolen transmitters or add new ones (max 5).