UniFi UVC-G3-DOME

14.02.2020 UVC-G3-DOME Quck Start Gude
https://dl.ubnt.com/qsg/UVC-G3-DOME/UVC-G3-DOME_EN.html 4/22
Ethernet Port
Reset Button
m  croSD Slot
The Ethernet port  s a 10/100 Ethernet port used to connect the power and should
be connected to the LAN and DHCP server.
To reset the camera to factory defaults, press and hold the Reset button for more
than 10 seconds wh  le the camera  s powered on.
Reserved for future use.
Hardware Installat  on
Wall Mount
1.
2.
UVC-G3-DOME Qu  ck Start Gu  de