Need help?Do you have a question about the Uniflair LEONARDO EVOLUTION TDAR 611A and is the answer not in the manual?
Covers warnings about tampering with safety devices and authorized personnel.
Safety guidelines for lifting, transporting, installing, and locating units.
Emphasizes maintenance by qualified personnel after unplugging.
Lists dimensions and specifications for Air Cooled Direct Expansion units.
Lists dimensions and specifications for Air Cooled Direct Expansion units.
Explains the operation of Air Cooled Direct Expansion units.
Explains the operation of Water Cooled Direct Expansion units.
Identifies main components using labels on a unit image.
Details the user terminal and access points to panels.
Identifies and describes components of the cooling circuit.
Identifies main components using labels on a unit image.
Lists and describes various components within the electrical panel.
Steps for installing the unit on raised flooring or a floor stand.
Specifies environmental requirements for the installation area, including clearances and positioning.
Procedures for opening unit doors and removing front, side, and rear panels.
Emphasizes qualified electricians and safe connection procedures.
Instructions for connecting unit drains and safety valve discharge.
Warnings and steps for connecting the humidifier drain to the building's drainage.
Provides installation advice and discusses discharge tube sizing for air-cooled units.
Graphics for determining discharge tube diameter based on cooling capacity for R407C.
Graphics for determining discharge tube diameter based on cooling capacity for R410A.
Explains how to size the discharge tube for oil flow and vibration prevention.
Detailed procedures for evacuating and charging the refrigeration circuit with various refrigerants.
Step-by-step guide to start up the unit, including electrical checks and user terminal interaction.
How to set the FS and PFS differential pressure switches for fan and filter monitoring.
Lists possible causes and corrective actions for units that fail to start.
Lists possible causes and solutions for high or low room humidity.
Addresses problems with room temperature being too high and their solutions.
Addresses problems related to absent or low airflow from fans.
Addresses problems with room temperature being too high or too low.
Addresses problems with room temperature being too low and their solutions.
Possible causes and corrective actions for high discharge pressure.
Addresses low suction pressure and potential coil freezing.
Troubleshooting for high-pressure switch intervention and low discharge pressure.
Troubleshooting for compressors not operating or internal protection intervention.
How to set the FS differential pressure switch for fan monitoring.
How to set the PFS differential pressure switch for filter monitoring.
Explains the operating principle of Energy Saving units, including free cooling.
Explains the operating principle of TWIN-COOL units with independent cooling circuits.
General| Brand | Uniflair |
|---|---|
| Model | LEONARDO EVOLUTION TDAR 611A |
| Category | Air Conditioner |
| Language | English |
To Next Page