Uniflame W-1881 - User Manual

Tools Needed
Screwdriver and adjustable wrench or pliers
Hardware/Parts
Part Description Qty
1 Loop 2
2 Leg 2
3 Leg Support 2
A Screw 11
B Nut 11
Step 1
Attach legs to leg supports using screws and nuts.
Step 2
Attach loops together using screw and nut.
Step 3
Attach loops to leg supports using screws and nuts.
CAUTION: Keep this product clean by using a damp
cloth. DO NOT use abrasive cleaners, as it will cause
parts to tarnish.
Assembly Instructions
Model No. 801658, W-1881
801658_s-OM-102 EF
Manufactured in China for: Blue Rhino Global Sourcing, Inc.
Winston-Salem, NC 27105 USA
1.866.758.3900, www.uniflame.com
© Blue Rhino Global Sourcing, Inc. All Rights Reserved.
UniFlame
®
is a registered trademark of Blue Rhino Global Sourcing, Inc . All Rights Reserved.
2
A
3
1
2
3
B
Contact (866) 758-3900 for assistance.
Do not return to place of purchase.

Summary

UniFlame Assembly Instructions

Tools Required for Assembly

Lists the necessary tools, including screwdriver and adjustable wrench or pliers.

Hardware and Parts List

Details all hardware and parts with their respective quantities for the assembly process.

Step 1: Attach Legs to Leg Supports

Connects the legs to the leg supports using screws and nuts as per the instructions.

Step 2: Connect Loops Together

Joins the loops by securing them with a screw and nut.

Step 3: Attach Loops to Leg Supports

Secures the loops to the leg supports using screws and nuts.

Product Care and Cleaning Caution

Advises on proper cleaning methods to prevent tarnishing, recommending a damp cloth.

Uniflame W-1881 Specifications