Service Manual
21
5.7 VOX(Voice Operated Exchange)
The VOX function allows you to transmit using the voice signal input into the microphone wi
thout pressing PTT.The VOX operation voice level can be adjusted, set in advance using the
CPS program, and changed by the user in menu mode.
5.8 RX Monitoring (Analog-only function)
You can forcibly disable or activate the squelch lock function using the monitoring button.
Monitoring button operation is a toggle.
5.9 Subtone Squelch 톤(Analog-only function)
CTCSS / DCS codes can be set and used in the CPS program to operate squelch for each wirele
ss channel.
CTCSS Tone
CTCSS subtone types are as follows