Service Manual
25
5.15 Password (When Turning On)
This is the function to assign a password to the radio.
Once a password is assigned, the password is confirmed when the radio starts (powers on). C
an be set in advance using the CPS program.
5.16 Display Language
Select Korean or English in the language selection function.
It can be set in advance using the CPS program, and the user can change it in menu mode..
5.17 Squelch Select Level
The squelch level can be adjusted in 3 levels. It can be set in advance using the CPS progr
am, and the user can change it in menu mode.
5.18 Cloning
CLONING is a function that copies the channel information of one radio to another radio. It
ems to be duplicated can be frequency channels/tones/SCAN, etc. Cloning function supports w
ired, wireless and Clone One methods.
Wired Cloning
◼ We prepare a dedicated cloning cable manufactured by our company.
◼ Turn on the original radio by pressing the monitor button on the side, and keep the
clone radio in standby mode.
◼ The text “CLONE (LINE)” is displayed on the LCD of the original radio.
◼ Connect the cloning cable to the Ear/Mic Jack of both radios.
◼ When you press the ‘Menu’ button on the original terminal, 0% is displayed, and then
when you press the PTT button, cloning is performed. If cloning is successful, the text
“Complete” is displayed on the LCD of the original radio.
◼ After removing the cable, power cycle both radios. After confirming that cloning was
successful, use the terminal.
To Next Page
Loading...
