UBio-X Pro Lite User Guide

27

UNIONCOMMUNITY Co., Ltd.

Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,

Seoul, Korea (zip code : 05836)

Tel : +82-2-6488-3000, Fax : +82-2-6488-3099

E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr

Input the user ID to be registered and click [OK]

button.

In this case, the ID which can be registered is shown

on the screen automatically, so you can register

conveniently. If you want to change ID, delete the

previous value by clicking [ ] button and input the

new value.

Click [Back] button to cancel and go back.

.

If you enter ID which is already registered, the failure message appears, and if the ID is

not registered, the following screen appears.

.

The icons in the left side mean as follows

: The number of registered faces

: The number of registered fingerprints (X,1~10)

: Existence of password registration (X : none, O :

registered)

: The number of registered cards (X,1~10)

: User ID to be registered

: User

: Administrator

Button: Registration with taking a picture of the user.

You can register the name with [Name], employee ID with [Employee ID], fingerprint

with [Fingerprint], face with [Face], duress finger with [Duress FP], card with [Card],

and password with [Password] button. The registration is basically set to be user, and

it is can be changed to administrator if you click [Admin] button. Click [Save] button to

save the registration, and click [Cancel] or [Back] button to cancel the registration and

return.

Union Community UBio-X Pro Lite User Manual

Questions and Answers: