UBio-X Pro Lite User Guide
48
UNIONCOMMUNITY Co., Ltd.
Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,
Seoul, Korea (zip code : 05836)
Tel : +82-2-6488-3000, Fax : +82-2-6488-3099
E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr
▶Basic setting : Same with the window at the left side
▶1:N Level (3~9)
It is the authorization level used in the 1:N Fingerprint
authorization. In case of 1:N authorization, the
authorization level is not set for each user, so the
authorization level of the terminal is always the
standard.
▶1:1 Level (1~9)
It is the authorization level used in the 1:1 Fingerprint
authorization. But, in case of the user whose 1:1
authorization level is not set ‘0’ (using the authorization
level of the terminal), it follows the 1:1 authorization
level of the user.
▶Fake Finger Detection
It sets the LFD level to prevent the fake fingerprint input. The higher level of the LFD
level, the preventing function of the fake fingerprint input such as rubber, paper, film, or
silicon is strengthened, but the fingerprint also can be hard to enter if the finger is dry
too much.
▶FP template format
It determines the format of fingerprint template. When some applications using SDK
need another format of the fingerprint, the fingerprint template format of the terminal
can be changed. But, if using UNIS server, it should be set the same with the template
format of the server.
- Union: It is the default setting and the volume is 400 bytes for each template. It is
the most optimized format related with all the functions using fingerprint (1:1
level, 1:N level, authorization speed, and fake fingerprint detection), and the
authorization can be fulfilled rapidly and correctly.
- ISO Standard: Fingerprint data is saved as ISO template which is 500 bytes for each
template.
- ISO Extended: Fingerprint data is saved as ISO template which is 600 bytes for each
template.
If you change the template format of the fingerprint, the following message box
appears.
To Next Page
Loading...
Need help?
General
