Need help?Do you have a question about the Uniphone ISDK-616 and is the answer not in the manual?
Details the technical specifications of the KSU and keyphone.
Details the specifications of various interface cards.
Provides specifications for the F0610 Multi-Function Card.
Details the specifications of the F0658 DSP Card.
Outlines the specifications for the Doorphone Voice Card.
Details the sequence of steps for installing the ISDK-616 KSU.
Guidance on selecting the appropriate main power supply.
Instructions for installing and managing the external battery.
Important precautions to follow during system connection.
Describes the basic installation of core equipment cards.
Details options for expanding the system with additional cards.
Explains how to connect the F0601 CPU card and its ports.
Key remarks and DIP switch configurations for the CPU card.
Information about the F0658 DSP card installation.
Details the connections and remarks for the F0638 TRK/STA card.
Explains the connections and functions of the F0610 card.
Table detailing RS-232 pin connections for various systems.
Instructions for installing the F0611 Doorphone Voice Card.
How to connect the doorphone and electric lock to the system.
Steps for initial system programming after installation.
Methods to clear existing programming data.
How to enter and navigate the programming setup mode.
Configures automatic day/night transfer settings.
Sets manual night transfer preferences.
Setting for the page prelude and coda tones.
Configures a password for night transfer.
Sets the start and end times for day service class.
Configures DTMF tone duration and CO line flash/recall times.
Sets pause time for speed dialling and keyphone time display format.
Sets camp-on time and re-call times for busy stations.
Sets warning tone interval during speaking and alarm re-ringing.
Sets re-call time for no-answer stations and holding time.
Sets time between hunting CO line and hearing dial tone.
Sets ringing time before call forward and for busy station reservation.
Configures alarm ringing time and electric lock operation time.
Configures auto-hunting modes and trunk line hunting.
Sets system password and defines dialing restrictions by service class.
Configures city, national, and international call service class restrictions.
Defines international call service class restrictions (3-4).
Configures system speed dialing tables and manager password.
Sets baud rate and transmission parameters for RS-232.
Sets warning tone interval and music source for hold function.
Sets the interval time and frequency for auto-redial attempts.
Sets inter-digit time for SLT pulse dialing and flash times.
Sets monitor time for trunk dialing and CO line pickup delay.
Sets confirmation digits for outgoing and incoming call billing.
Sets waiting time for overriding a busy station.
Sets the beginning and ending times for holiday mode.
Configures Day/Night transfer for holidays and lunch breaks.
Sets warning interval for incoming calls to busy stations.
Configures CO line hunting modes for PBX1 and PBX2.
Sets alternate ringing tone times and electric door lock code.
Defines handling for busy forwarded stations and max speed dialing numbers.
Sets max individual speed dialing numbers and DTMF receiving volume.
Sets minimum and maximum receiving volumes.
Sets initial volume and time scale for auto-increase ringing.
Configures auto-release for incomplete dialing and simultaneous hearing.
Allows speed dialing during calls and configures account code groups.
Sets internal dialing tone volume for off-hook and on-hook.
Option to delete repeated Caller ID numbers.
Selects RS-232 interface usage and configures reserve/queuing behavior.
Sets ringing times for doorphone and configures CO-to-CO call forwarding.
Sets monthly day/night transfer types and override working mode.
Controls internal and DSP/DISA music on hold volume.
Enables CM check before check-in and auto-start CS after check-out.
Configures SMDR printing for called number digits and last digits.
Sets waiting time for F168 busy station forwarding and DTMF input.
Configures RS-232 account printing and call park group size.
Sets call park operation mode and enables busy tone for auto-redial.
Assigns forwarding for busy stations and enables account code printing.
Enables HELP printing and setting company name for dialling plan.
Enables DND status printing and changes SMDR time mode.
Displays caller information and allows dialing without hanging up on busy stations.
Sets alarm clock start weekday and configures direct forwarding mode.
Enables LCR function and sends trunk location with Caller ID.
Prioritizes station access and sets voice mail protocol delay count.
Configures account code printing and controls calling time with manager password.
Sets maximum checking groups for call barring.
Switches music on hold for built-in DSP/DISA.
Switches the alarm language setting.
Sets the station used status (Normal/Unused).
Enables or disables the "Do Not Disturb" function.
Fixes the type of installed interface.
Configures ringing tones for incoming calls.
Enables or disables exclusive hold and configures direct CO line grab.
Enables group pick-up and automatically increases ringing volume.
Forwards station on day time after ringing timeout.
Sets DISA/DSP language and configures voice prompts for different modes.
Sets ringing mode for transfers and waiting time for dialing.
Sets station status before/after DISA answers and monitoring times.
Sets delay time before DISA greeting and operator calling mode.
Assigns station for fax reception and sets waiting code.
Sets waiting time after code and language codes for messages.
Sets passwords for remote recording, announcements, and programming.
Sets the maximum recording time.
Sets the working mode for Day, Night, Noon, and Special times.
Configures various parameters for working modes and assigns department codes.
Sets the operator and inquiry codes for working modes.
Configures direct dialing to extensions.
Defines caller actions when no input after voice announcement.
Sets transfer mode after 'Station Void-No.' and 'Station Busy' announcements.
Sets transfer mode after 'Station No Answer' announcement.
Sets transfer mode after 'Operator On Busy' and 'Operator No Answer' announcements.
DISA announcement for extension dialing and waiting permission settings.
General| Speed Dial | Yes |
|---|---|
| Caller ID | Yes |
| Volume Control | Yes |
| Power Source | AC Adapter |
| Lines | 6 |
| Extensions | 16 |
To Next Page