furnaces, refrigerators, or water heaters.
5 Obstructions in or unconventional vent pipe designs which can
amplify the above situations.
5.4.2 Extended operation of un-vented fuel burning devices (range, oven,
fireplace, etc.)
5.4.3 Temperature inversions, which can trap, exhaust gasses near the
ground.
5.4.4 Car or generator idling in an open or closed area garage, or near a
home.
6.0 INSTALLATION INSTRUCTIONS: READ CAREFULLY
BEFORE INSTALLING ALARM
CAUTION: THIS UNIT IS SEALED. THE COVER IS NOT
REMOVABLE!
6.1 Select proper location (See section 5.0)
6.2 A mounting plate is provided on the back of the alarm. Remove the
mounting plate from the back of the alarm by holding the mounting
plate and twisting the alarm in the direction indicated by the "OFF"
arrow on the alarm cover.
Step A: Wall Alignment
To Next Page
Loading...
