Unique UGP 10C - Page 3

3
3. With orifice off, soak in a solvent such as paint
thinners or isopropyl alcohol and ensure it’s
cleaned well.
4. Do not use any pins or sharp objects to clean
otherwise you will enlarge the holes creating a
Carbon Monoxide hazard.
5. After orifice is removed. Remove bracket in
order to run small brush down burner tube to
clean any spider webs or bugs from within the
tube.
Oldstyleorifice
Makesureorificeisspotlessinside
Oldstyleorifice
Checktoensurethetipisclear
Newstyleorifice
Makesureorificeisspotlessinside
Checktoensurethetipisclear
Newstyleorifice
Removetwoscrewsto
cleanburnertube
Movebracketaway
togetatburnertube
Makesureyoucleanentire
burnertube
Burnerinthisimageisshowncompletelyoutofbox,youwill
havetoworkfromwithintheburnerbox.Removingthe
thermocouplewouldgiveyoumorespacetoworkifrequired.