Unique UGP 13 - Door Reversal and Temperature Controls; Door Removal and Reversal

UNIQUE UGP 13
26
Door Removal & Reversal Instructions
This appliance has the capability of either opening the door from the left or right side.
The unit is delivered to you with the door opening from the left side, to the right. Should
you desire to reverse the opening direction, please follow these instructions.
NOTE: All parts removed must be saved to do the re- install the door.
Remove the hinge cover on the right top of the cabinet.
Remove the 4 bolts that hold the top hinge in place using a ratchet tool with an 8 mm
socket or a Phillips screwdriver. Keep these for later use.
Lift the top hinge straight up to free the pin from the socket on the top of the door.
Remove the hinge pin bushing from the top right side of the freezer door and move it to
the left.
Chapter
6
Chapter
7
Hinge Pin
Bushing