User guide | 29
English
Click on ” Submit ” and the eVscope 2 LED will turn from red to a blinking bright yellow
( the eVscope 2 is trying to connect to the selected network ).
Your device will no longer be connected to the eVscope 2 and information like the
name or storage usage won’t be accessible in the app. The LED will blink in a regular
pattern.
Once connected to the selected network, the LED will either :
- Turn green and blink rapidly between 1 and 6 times and stay solid green for 1 minute
if the upload succeeds.
- Turn solid orange during 1 minute which means an error has occurred. In this case
see section 9 - Troubleshooting of the user guide.
Once the transfer is complete, reconnect your phone to the eVscope 2 and go back to
the User tab in the App. You should see “Storage: 1% used”. The remaining 1% is used
for dark frames and for internal fi les necessary for the operation of the eVscope 2.
We are working on making RAW images accessible for post processing. Subscribe to
our newsletter to stay informed: unistellaroptics.com
There is no USB or Ethernet port to read images. Images can be saved and shared on
the smartphone connected to the eVscope 2. They are in PNG format.
The number of blinks indicates how much data there is to transfer, the higher the
number of blinks the more data there is to upload.
Scan this QR code to be redirected to our FAQ
with more visual content including a video on
how to upload your data
Did You
Know ?
To Next Page
Loading...
