User guide | 39
English
Declarations
Hereby, Unistellar SAS declares that the radio equipment type eVscope 2 is in compliance
with Directive 2014/53/EU, the FCC 47 CFR Part 15 and the ICES-003 / NMB-003 standards.
The full text of the declarations of conformity is available at the following internet address:
unistellar.com.
Contains: FCC ID: 2ABCB - RPI3BP. Contains IC: 20953-RPI3P
For Canadian users: A separation distance of 20cm or more is required between the user
and the device according to Canadian standard RSS-102 — Radio Frequency (RF) Exposure
Compliance of Radiocommunication Apparatus (All Frequency Bands)
(https://www.ic.gc.ca/eic/site/smt-gst.nsf/ eng/sf01904.html)
当該機器には電波法に基づく、技術基準適合証明等を受けた特定無線設備を装着している
To satisfy RF exposure requirements, a separation distance of 20 cm or more should be
maintained between this device and persons during device operation.
To ensure compliance, operations at closer than this distance is not recommended. The
antenna used for this transmitter must not be co-located in conjunction with any other
antenna or transmitter
The eVscope 2 is recommended to set up on the tripod along with the
telescope only. It can’t be set up on any other brand tripod, otherwise the
action will bring unexpected damage or hurt somebody.
Recycling
This device is compliant to the 2012/19/UE directive and should not be disposed
of in household waste. The special waste disposal varies according to local rules.
The correct recycling of electronic devices helps to preserve the environment
and health.
Unistellar SAS
19 rue Vacon
13001, Marseille France
N° SIRET 81233935600022
Designed in France – Made in China
Type of product : Telescope
Type designation : eVscope 2
Brand Name : Unistellar
Ratings : 5Vdc, 2,4A, Class III
v 1.1.4
!
To Next Page
Loading...
