13
© 2022 Unitech Electronics Co., Ltd. All rights reserved.
Unitech is a registered trademark of Unitech Electronics Co., Ltd.
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
1.4.3 Charging Battery
Before using the terminal for the first time, you need to charge it for about 24
hours. For regular use, you can charge the terminal with QC (quick charge) USB
type-C cable and QC adapter for within 2.5 hours to full capacity.
It takes within 4 hours to charge the terminal with the cradle to full capacity.
Connect the type C USB cable to the USB port on EA630 Plus and the other
end of the USB cable. Please connect to AC power adapter into the electrical
outlet on the USB plug.
The charging LED indicator on EA630 Plus is turning red when it is in charging
state. The green light is on after the battery is fully charged.
To Next Page
Loading...
