Unitech HT730 Quick Start Guide

LED Indicator Status
CAUTION!  To ensure the unit working properly, please keep all connectors
away from the contaminants staying inside of them such as dust,
grease, mud, and water. The negligence may cause the unit with no
communication, short circuited, overheated and so on.
 If the connector is damaged, please ensure the connector is being
fully repaired before using the unit to avoid causing short circuited.
http://www.ute.com/
When the cradle is under standby mode:
Blue LED
Power is on.
When battery is charging:
Red LED
Battery is being charged in rear slot.
Blue LED
Battery charging is completed.
When HT730 is inserted in the cradle, the LED
indicator on the cradle will not be changed. The
charging status is indicated by the LED of HT730:
Red LED
HT730 is being charged .
Green LED
HT730 charging is completed.
Copyright 2023 Unitech Electronics Co., Ltd. All rights reserved.
Unitech is a registered trademark of Unitech Electronics Co., Ltd.

Unitech HT730 Specifications

General

Brand	Unitech
Model	HT730
Category	Touch terminals
Language	English