Need help?Do you have a question about the United CoolAir C Series and is the answer not in the manual?
Inspect unit for visible or concealed damage upon receipt and report any damage.
Instructions for moving the unit using a skid, two-wheel hand truck, or forklift.
Guidance on selecting a suitable installation location considering access, wiring, and disposal.
Procedures for securing the unit, including tie rails and vibration isolators.
Ensure evaporator section is tilted 0.375"-0.5" towards the condensate drain.
Table indicating recommended wire gauge and maximum wire length for control wiring.
Critical warning about loosening compressor mounting nuts before initial start-up to prevent vibration.
Detailed steps for separating evaporator and condensing sections for split system installation.
Guidelines for checking, replacing, and cleaning air filters based on unit size and type.
Procedures and benefits of cleaning the water-cooled condenser for optimal performance.
Information on blower packages, checking wheel tightness, and bearings.
Understanding sightglass indicators for refrigerant charge and moisture content.
Step-by-step process for initiating the unit's cooling cycle based on thermostat settings.
Step-by-step process for initiating the unit's heating cycle using electric heat.
Step-by-step process for initiating the unit's heat pump heating cycle.
Installation and operation of an optional condensate pump for extreme conditions.
Guidelines for selecting and installing thermostats, including programmable types.
Procedures for checking and adjusting the hot gas bypass valve for system balancing.
Overview of the microprocessor controller for advanced zone control and monitoring.
Description of the optional steam humidifier and its operation principle.
Information on integrated and duct-mounted electric heat options.
Function of electric reheat for dehumidification purposes.
Details on steam coils, including types and connection points.
Information on hot water coils, their location, and connections.
Function of the damper control for maintaining condensing pressure in low ambient temperatures.
How fan cycling controls head pressure by modulating the condenser fan.
Mechanism for maintaining head pressure in low ambient conditions using a flooded condenser.
Details on a kit to protect the outdoor condensing section from elements.
Information on the vertical stacking option for space-constrained installations.
A guide to identifying and resolving common unit operational problems and their causes.
Explanation of the coding system used to define unit model numbers and their specifications.
General| Brand | United CoolAir |
|---|---|
| Model | C Series |
| Category | Air Conditioner |
| Language | English |
To Next Page