Need help?Do you have a question about the United Technologies Carrier XARIOS 500 and is the answer not in the manual?
Details on deflector installation relative to the unit and accessibility requirements.
Identifies condenser inlet/outlet points and preparation steps, including lubrication.
Instructions for connecting refrigeration hoses and marking them for proper installation.
Guidelines for mounting hoses, focusing on curve radius and length variation.
Methods for preventing thermal bridges and securing lines/harnesses internally.
Guidelines for securing refrigeration lines and harnesses under the vehicle.
Details on the 3-way suction fitting and oil return connection points.
Information on compressor preparation, including checking the adhesive label and oil.
Steps for installing the liquid injection thermostat (Klixon) and its wiring.
Diagrams illustrating manifold gauge connections for mono and multi-temperature units.
Procedure for cleaning gauge hoses before commissioning to ensure accuracy.
Steps for pre-leak checking using evacuation and nitrogen gas.
Instructions for performing a vacuum on the unit down to 500 microns.
Table detailing refrigerant charge amounts for various Xarios models.
Procedure for adjusting the CPR on mono-temperature units using pressure settings.
Procedure for adjusting CPR on multi-temperature units for each compartment.
How to correctly set superheat for optimal performance and compressor longevity.
Instructions for completing the oil charge for various Xarios units.
General| Brand | United Technologies |
|---|---|
| Model | Carrier XARIOS 500 |
| Category | Automobile Accessories |
| Language | English |
To Next Page
