CLEANING FLOORS
Attach the floor brush to the extension wands, which snap together. Then attach the
extension wand to the steam gun. Do ensure the extension wands are firmly connected.
Before cleaning always remove dust from the surface you wish to clean.
To release the extension wands press the button on the hose connection.
Cleaning floors & carpets with the cleaning cloth.
While the machine is switched off attach the cleaning cloth to the floor brush via the
spring loaded clips, make sure the edges of the cleaning cloth are secure. DO NOT
attempt to do this while the machine is still hot. Never remove the cleaning cloth
whilst the safety trigger is released or the machine is warm to the touch.
Warning - risk of injury!
FITTING THE ACCESSORIES
The accessories may be fitted to the steam gun(9) using one or both adaptors 16a and
16b. When using the round brushes or high-pressure nozzle, Squeegee head ,adaptors
16a and 16b are both required.
Cleaning and maintenance operations should be carried out with the appliance
disconnected from the power supply.
The machine should be allowed to completely cool down before it is stored away or
cleaned.
Clean the machine and its accessories with a slightly damp cloth only. Never use a
cleaning product or detergent. To ensure that your appliance operates correctly over a
long period, rinse out the water tank once a month to remove lime-scale deposits.
Never use vinegar or a lime-scale remover.
SWITCHING ON THE APPLIANCE
Before switching on the appliance, check that the mains voltage that you want to use
is suitable for the appliance. The information you need for this is shown on the
identification plate. (230V~50Hz).
To Next Page
Loading...