How to Operate the steam gun
First: Know your steam gun.
You will find the steam trigger & red Safety button on steam gun.
You will find the Red safety button has the positions: ”off/lock , on “.(see photo 1)
Second: Operation
a) Steam spray out
Wait for the appliance to warm up and reach steam pressure.
First Press Red Safety button to “ON” position, after that press the steam trigger. Steam
will start coming out. You only need to press the steam trigger when you want to clean
something. See photo (No.2)
b) Continuous steam spray out.
If you want the steam to continuously spray out and do not want to press the steam trigger
again and again. Keep the steam trigger pressed, then press the red safety button to
“Off/Lock” position. Now you do not need to press the steam trigger repeatedly. The
steam will continuously spray out. (See photo (No.3+4)
c) Shut down
After cleaning. You should better secure the steam gun.
If you are cleaning such as in pic 4 situation, and you want to stop cleaning, then you only
press red safety button to “ON” position, and the steam trigger will release . After that you
press red safety button to “off/lock” position. Now, no matter how many times you press
the steam trigger, no steam will come out as it is locked (See photo from 5-1)
ACCESSORIES
The accessories provided allow you to use the power of steam to blast away grease,
grime, mildew, scum, kill dust mites, fleas and harmful germs, all with minimum
effort, from difficult to reach and clean places - all without the use of chemicals.
Cleaning Cloth (15)
Machine washable when dirty. Easily fits to the floor brush via spring loaded clips.
The cloth is designed to lift, trap and absorb dirt from sensitive cleaning surfaces,
leaving surfaces clean and sanitized.
To Next Page
Loading...