Need help?Do you have a question about the Unitor HPC 30/1 and is the answer not in the manual?
Explains symbols like WARNING and water connection symbols used throughout the manual.
General safety warnings and precautions for operating the pressure washer.
Instructions and checks before using the cleaner for the first time.
Recommendations for safely transporting and storing the equipment.
Requirements for connecting the machine to potable water mains with backflow preventer.
Guidelines for safe electrical connection by a qualified electrician.
Explains thermal sensor, unloader valve, and spray handle locking device.
Safety precautions and guidelines for maintenance and repair.
Lists and describes the main operating parts of the high-pressure washer.
Step-by-step instructions for assembling the high-pressure washer.
Steps for safely turning on the high-pressure washer.
Details on controlling the unit, using cleaning agents, and adjusting pressure.
Instructions for managing the power cable during use and storage.
Procedure for cleaning the water filter when it becomes clogged.
Steps to follow after the high-pressure washer has been used.
Instructions for routine maintenance tasks like checking oil.
Lists common faults like pressure fluctuations and motor issues with their causes and solutions.
Schedule for routine maintenance tasks like filter cleaning and oil checks.
Special instructions for operating the unit in self-suction mode.
Lists part numbers and specifications required for self-suction setup.
Lists standards and directives the product complies with.
States the measured and guaranteed noise emission levels for the product.
Details on country-specific variations or requirements.
Specifies the voltage, phase, and frequency compatibility.
Indicates the fuse rating for the appliance.
Specifies the power consumption in kW.
Defines the operating pressure range of the high-pressure washer.
Specifies the water flow rate in liters per hour.
Details the maximum allowable water pressure.
Specifies the maximum water inlet temperature for operation.
Indicates the maximum allowable water inlet pressure.
Specifies the maximum height for dry suction operation.
Provides the physical dimensions (Length x Width x Height) of the unit.
States the total weight of the high-pressure washer.
Specifies the sound pressure level emitted by the unit.
Specifies the sound power level emitted by the unit.
Details the vibration levels experienced during operation.
Specifies the recoil forces generated by the spray lance.
Indicates the required amount of oil for the machine.
Specifies the recommended type of oil for the machine.
General| Brand | Unitor |
|---|---|
| Model | HPC 30/1 |
| Category | Pressure Washer |
| Language | English |
To Next Page
