Unitron Insera B1-312 - Page 10

14 15
Push button as program control
If the push button has been congured as
a program control, each time you push the
button, you will move to a dierent hearing aid
program.
Your hearing aids beep to indicate which
program you are in.
Program setting Beeps
Program 1 (e.g. automatic program) 1 beep
Program 2 (e.g. speech in noise) 2 beeps
Program 3 (e.g. easy-t/telephone) 3 beeps
Program 4 (e.g. music) 4 beeps
Easy-t/telephone (Insera B-312 NW O
and Insera B-10 NW O)
short melody
DuoLink
(Insera B-312 only)
Opposite ear beeps
the same as side
being adjusted
Push button as volume control
If your push button has been congured as a
volume control, either:
• Push the button on your right hearing aid to
increase the volume, and
• Push the button on your le hearing aid to
decrease the volume
or:
• Push the button to step through your
volume levels
As you change the volume control, your hearing
aids will beep.
Volume setting Beeps
Suggested volume level 1 beep
Turning volume up short beep
Turning volume down short beep
Maximum volume level 2 beeps
Minimum volume level 2 beeps