52 53
Product safety
These hearing aids are water resistant
and not waterproof. They are designed to
withstand normal activities and occasional
accidental exposure to extreme conditions.
Never immerse your hearing aid in water.
These hearing aids are not specically
designed for extended periods of water
submersion on a continual basis, that is
worn in activities such as swimming or
bathing. Always remove your hearing aid
before these activities, as the hearing aid
contains sensitive electronic parts.
Never wash the microphone inputs. Doing
so could cause it to lose its special acoustic
features.
Protect your hearing aid and charging
accessories from heat (never leave near
a window or in the car). Never use a
microwave or other heating devices to dry
your hearing aid or charging accessories
(due to risk of re or explosion). Ask your
hearing care professional about suitable
drying methods.
Do not place the charging accessories close
to an induction cooking surface. Conductive
structures inside the charging accessories
could absorb inductive energy resulting in
thermal destruction.
The dome should be changed every three
months or when it becomes sti or brittle.
This is to prevent the dome from detaching
from the tube spout during insertion into or
removal from the ear.
Do not drop your hearing aid or charging
accessories. Dropping onto a hard surface
can damage your hearing aid or charging
accessories.
Charger, Power Pack and power supply must
be protected against shocks. If the charger,
Power Pack or power supply is damaged
aer a shock, the devices must not be used
anymore.
To Next Page
Loading...
Need help?
General
