28
To affix the optional easy-t magnet:
1. Clean the telephone receiver.
Hold the magnet near the
“listening end” of your
telephone receiver and release
it. The magnet will flip to the
appropriate side and seek the
optimal position on the
telephone receiver.
2. Place the double-sided tape in
this optimal position on the
telephone receiver.
3. Attach the magnet to the tape.
Your hearing healthcare professional may also
have set up a phone program that you can
access through the push button on your hearing
aids, or through your optional remote control.
If your hearing aids are configured to work
with the wireless uDirect
™
neck worn
accessory, you might benefit from a
Bluetooth
®
hands free option. Refer to the
uDirect user guide for more information.
2.
3.
1.
®
Bluetooth is a registered trademark of Bluetooth SIG Inc.
To Next Page
Loading...
