Unitron Quantum - Comfort-Clarity Control Settings Explained; Comfort-Clarity Control Settings

21
Push button
Your hearing aids may be equipped
with a push button which can be set
for switching between programs, to
adjust your volume, or to adjust comfort-clarity.
Program control
If the push button has been configured as a
program control, each time you push the
button, you will move to a new hearing aid
program.
Your hearing aids beep to indicate which
program you are in.
Program 1
(e.g. automatic program) 1 beep
Program 2
(e.g. speech in noise) 2 beeps
Program 3
(e.g. easy-t/telephone) 3 beeps
Program 4 (e.g. music) 4 beeps
Easy-t/telephone (see pg 26) short melody
Easy-DAI short melody
DuoLink (if enabled) Opposite ear beeps the
(see pg 24) same as side being adjusted