Unitron Remote control 2 - Interference Management and Labeling; Minimizing Interference and Identifying Components

19
such as a digital cell phone, or other strong
electromagnetic eld, it may be necessary
to be at least 24 inches (60 centimeters)
away to ensure proper operation.
If your hearing aids do not respond to the
remote control because of an unusual eld
disturbance, move away from the disturbing
eld.
Keep the device at least 10 cm away from
any kind of magnets.
High-powered electronic equipment,
larger electronic installations and metallic
structures may impair and signicantly
reduce the operating range.
Labeling
The serial number and year of manufacture are
located inside the battery compartment.
Please ll out the contact information sticker
provided with your new remote control and ax
it to the inside of the battery door.