Unitron Stride B3-PR - Charging Your Hearing Aids; Connecting the Power Supply; Inserting the Hearing Aids

14 15
Power supply specication
Power supply output
voltage
5 VDC +/-10%,
current 1 A
Power supply input voltage
100-240 VAC, 50/60Hz,
current 0.25 A
Charger input voltage
5 VDC +/-10%,
current 500mA
USB cable specications
5 V min. 1 A, USB-A to
USB-C, maximum
length 3 m
2) Insert the hearing aids
Insert the hearing aids rmly into the charging
slots. Make sure the le and right hearing
aid markings match the le (blue)/right (red)
indicators in front of the charging slots. The
hearing aids will automatically switch o when
inserted into the charger.
Charging your hearing aids
1) Connecting the power supply
a) Plug the larger end of the charging cable into
the power supply.
b) Plug the smaller end into the USB-C port on
the charger.
c) Plug the power supply into a power outlet.
d) The indicator light is green when the charger
is connected to the power supply.
a
b
d
c