12 13
3. Remove the hearing aids from the charging
slots by
1. tilting the
hearing aids
gently towards
the back and
2. liing them out
of the charger.
By default, the
hearing aids are programmed
so that they turn on
automatically when they are
removed from a charger that
is connected to the power
supply. Your hearing care
professional can turn this
setting o. In this case, you will need to switch
the hearing aid on manually.
To switch o the charger, remove the power
adapter from the power outlet. If the optional
Power Pack is attached to the charger, remove
the Power Pack to switch o the charger.
Do not hold the earpiece to remove the hearing
aid from the charger as this can damage the tube.
Turn o your hearing aid before inserting it in the
disconnected charger to store it.
If you unplug the charger while the hearing aid
is charging inside, please make sure to turn o
the hearing aid to prevent discharge.
Always close the lid when charging you hearing
aids in a humid environment.
To Next Page
Loading...
Need help?
General
