Unitron Stride V-PR - Initial Pairing; Connecting the Device

24 25
11. Initial pairing
Initial pairing to a Bluetooth
®
enabled device
It is only necessary to perform the pairing
procedure once with each device featuring
Bluetooth® wireless technology. Aer the
initial pairing, your hearing aid will connect
automatically to the device. Initial pairing
can take up to 2 minutes.
1. On your device (e.g. a phone), ensure that
Bluetooth® wireless technology is enabled
and search for Bluetooth® enabled devices
in the connectivity setting menu.
2. Switch on both your hearing aids. You now
have 3 minutes to pair your hearing aids
with your device.
3. Your device shows a list of Bluetooth®
enabled devices.Select the hearing aid from
the list to simultaneously pair both hearing
aids. A beep conrms successful pairing.
12. Connecting the device
Aer being paired to your device, your hearing
aid will automatically connect again when
switched on.
The connection will be maintained as long
as the device remains ON and within range
Your hearing aid can be connected to up
to two devices and paired to up to eight
devices.