50 51
The wireless models listed on page 2 of this user guide are
certied under:
Standard hearing system
USA - FCC ID: Canada - IC:
Stride B-PR KWC-BPR 2262A-BPR
Notice 1
This device complies with Part 15 of the FCC Rules and with RSS-
210 of Industry Canada. Operation is subject to the following two
conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including
interference that may cause undesirable operation.
Notice 2
Changes or modications made to this device not expressly
approved by Sonova AG may void the FCC authorization to operate
this device.
Notice 3
This device has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules
and ICES-003 of Industry Canada. These limits are designed to
provide reasonable protection against harmful interference in
a residential installation. This device generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this device
does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the device into an outlet on a circuit dierent from
that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for
help
Charger:
Please keep at least 20 cm separation distance between the
charger and the human body during operation.
Radio information of your wireless hearing aid
Antenna type Resonant loop antenna
Operation frequency 2.4 GHz – 2.48 GHz
Modulation GFSK, Pi/4 DQPSK, GMSK
Radiated power < 1 mW
Bluetooth
®
Range ~1 m
Bluetooth 4.2 Dual-Mode
Proles supported HFP (Hands-free prole), A2DP