Unitron uDirect Product Guide

15
remain in the pairing mode for two minutes or until
the pairing is complete.
5. In the Bluetooth menu the PC will list all Bluetooth
devices within range. Of the devices found, choose
uDirect and select “pair”.
6. When the PC prompts for a passcode or PIN, enter
“0000” (four zeros).
7. Allow devices to complete the establishment of a
trusted link.
8. If prompted on the PC to choose Bluetooth
services, you may have several options available.
Select the "Stereo Headset" functionality to stream
audio in stereo. After choosing which services you
want to enable, you can finish the connection and
exit the setup on the PC.
Confirmation of successful connection is indicated on
uDirect by the Bluetooth indicator slowly flashing
blue.
Deleting Bluetooth Pairings
If you want to delete the pairing relationships
between your uDirect and other devices, press and
hold the Bluetooth pairing button for approximately 10
seconds until the Bluetooth indicator is lit solid blue.
Note: Deleting the Bluetooth pairings removes the
ability to connect to any previously established

Unitron uDirect Specifications

General

Brand	Unitron
Model	uDirect
Category	Accessories
Language	English