24
Connecting via FM System
When noise, distance or reverberation is a challenge,
FM systems greatly improve communication. A wireless
FM communication system consists of a transmitter
and a receiver. The transmitter is placed on, near, or
directly connected to the sound source (e.g. TV or radio).
• Attach the FM receiver to uDirect via the FM input
(Europlug) as shown in the picture below
• Place the FM transmitter on or near the sound
source or connect it to the TV or radio and turn it ON
• Turn the FM receiver ON. If you use a MicroLink
MLxS, receiver, set the switch to the position "•"
The streaming indicator will light solid orange to
indicate FM usage.
To deactivate FM, turn OFF the attached FM receiver or
unplug it. uDirect will automatically activate the
previously active listening program.
Note: The FM connection will remain ON for at least 60
seconds even with no signal transmitted to ensure
uninterrupted transmission in situations such as
To Next Page
Loading...
Need help?
General
