26
instruments. Some Bluetooth devices provide
support to respond to a pause command from the
uDirect. In these cases, the audio will be paused on
your device, and may be resumed from the same
position later.
Stop Streaming
To stop streaming audio, turn OFF the audio source or
unplug the audio cable or disengage the audio
devices’ Bluetooth functionality.
When streaming stops, uDirect will automatically
activate the previously-active hearing program after a
short period of time. This occurs whenever the
streaming signal stops for more than 5 seconds.
(Except in the case of FM, which will stop after 60
seconds to accommodate lectures).
Audio Lock
When streaming audio signals, you might notice the
hearing instruments switching back and forth between
the audio signal and the hearing instrument
microphones. This occurs when the audio signal is
very soft or interrupted by pauses. To avoid the
system changing you can lock in the streamed audio
signal by pressing the ON/OFF button quickly.